Maintenance Tips

Window Type vs Split Type Aircon Cleaning: What's the Difference?

April 19, 2026 · 6 min read

NJ Aircon Services technicians performing aircon service in Alabel Sarangani Province

When you book an aircon cleaning in the Philippines, the first question your technician will ask is: Window Type or Split Type? These aren't just labels — they're different units with different designs, and they require different cleaning procedures.

If you're in Sarangani Province or General Santos City, here's a clear breakdown of what each service covers, how much it costs, and when you might need a deep clean or preventive maintenance added on top.

Window Type Aircon Cleaning — ₱500 per unit

Unit type: Single-piece window-mounted unitsTime: ~45 mins/unit₱500 / unit

Window type aircons are the older, single-piece units installed directly into a wall opening or window frame. Because everything is in one box — compressor, evaporator, and condenser — they're simpler to access and clean.

What's included:

  • Air filter removal and cleaning
  • Evaporator coil rinse
  • Fan blade cleaning
  • Drain pan and drain line check
  • Front panel wipe-down
  • Basic operational check after cleaning

You can book a window type cleaning starting at ₱500 — get a quote here or call us at 0938-503-2512.

Split Type Aircon Cleaning — ₱1,000 per unit

Unit type: Two-piece indoor/outdoor unitsTime: ~2 hrs/unit₱1,000 / unit

Split type aircons are the modern wall-mounted units with a separate indoor head unit and outdoor compressor. They're more common in newer homes and offices, and they take longer to clean properly because the indoor unit needs to be fully opened and the blower wheel cleaned.

What's included:

  • Air filter removal and cleaning
  • Indoor unit cover removal
  • Evaporator coil wash
  • Blower wheel (fan) cleaning
  • Drain pan and drain line clearing
  • Outdoor unit inspection and rinse
  • Full reassembly and operational test

Why Does Split Type Cost More?

The price difference comes down to time and complexity. A window type unit takes about 45 minutes because it's one accessible piece. A split type takes about 2 hours because the indoor unit has to be carefully opened, the blower wheel — which collects the most mold and dust — has to be removed and cleaned separately, and then everything has to be properly reassembled.

The extra cost reflects the extra work — not a markup. A split type unit that's been properly cleaned will outperform one that was rushed through in 30 minutes.

Side-by-Side Comparison

Window TypeSplit Type
Filter cleaning
Coil washRinseFull wash
Blower wheel cleaning
Drain lineCheckFull clear
Outdoor unitN/AInspection + rinse
Full reassembly
Time per unit45 min~2 hrs
Price per unit₱500₱1,000

Add-On Services: Deep Clean & Preventive Maintenance

Both Window Type and Split Type cleaning are standard maintenance services. But some units need more than that — and that's where our add-on services come in. These are charged on top of the base cleaning price and are only recommended when the unit actually needs it.

🧪

Deep Clean / Chemical Wash

Full chemical treatment of all internal components — evaporator coil, blower wheel, and drain pan. Eliminates mold, bacteria, and heavy buildup that a standard cleaning can't fully remove.

Recommended when:

  • ✓ Unit hasn't been cleaned in over a year
  • ✓ Persistent musty or bad smell
  • ✓ Visible mold inside the unit
  • ✓ Still not cooling after standard clean
🔧

Preventive Maintenance

Full inspection of electrical connections, refrigerant level, thermostat calibration, fan motor, and capacitor. Identifies developing problems before they cause a breakdown.

Recommended when:

  • ✓ Unit is 5 years old or more
  • ✓ Commercial unit with heavy daily use
  • ✓ Higher electricity bill without explanation
  • ✓ Unit making unusual sounds

* Add-on pricing is quoted on assessment. Contact us to find out what your unit needs before booking.

Frequently Asked Questions

What is the difference between Window Type and Split Type aircon cleaning?

Window Type cleaning (₱500) covers filter, coil rinse, fan blades, and drain check — standard for single-piece window units. Split Type cleaning (₱1,000) takes longer and includes blower wheel cleaning, full indoor unit disassembly, and outdoor unit rinse due to the more complex two-piece design.

How much does aircon cleaning cost in General Santos City?

NJ Aircon Services charges ₱500 per unit for Window Type and ₱1,000 per unit for Split Type cleaning in General Santos City and Sarangani Province. Deep clean and preventive maintenance are available as add-ons for units that need extra attention.

When do I need a deep clean add-on?

You need a deep clean when your aircon hasn't been cleaned in over a year, has a persistent musty smell, has visible mold inside, or is still not cooling properly after a standard clean. It's a chemical treatment on top of the standard service.

What is preventive maintenance and when do I need it?

Preventive maintenance is an add-on that includes a full inspection of electrical connections, refrigerant level, thermostat, and performance. It's recommended for units 5 years or older, commercial units, or any unit showing signs of reduced performance.

Can I get a deep clean and preventive maintenance on the same visit?

Yes. Both add-ons can be done in the same visit on top of your Window Type or Split Type cleaning. This is the most thorough option for older or heavily used units. Contact us at 0938-503-2512 to arrange this in Alabel or General Santos City.

Book Aircon Cleaning in Alabel or General Santos City

Not sure what your unit needs? Just call or message us — we'll ask a few quick questions and recommend the right service.